Loading...

insert 60

Pellet insert
 
Is the ideal solution for those who wish to make use of an existing, unused fireplace, for those who can't resist the charm of a fireplace but want the convenience of a pellet heater. Equipped with a curved firebox glass for a wider view of the fire.
Heatable area
96 .
  • Grey
 


1 - Easy access to the pellet tank, even during the working phase (fast rigid mobile kit)
2 - Cool touch door handle
3 - Removable spacious ash tray
4 - Cast iron firebox door with curved ceramic glass
5 - Reinforced rails included for extraction

Every uniti s tested for one hour in the factory Remote control Our products don’t incur additional cost for adjustments or testing Simplified cleaning system Heat exchanger Thermocore® External rotor room fan is guaranteed for 4 years Low energy consumption Higher heat accumulation only 36 decibels of noise Thermosilent system Made in Italy





Dimensions
  • thermorossi_dimension_insert_60
Technical data
DIMENSIONS (HXWXD)    604x756x729
WEIGHT (kg)    159
HEATABLE AREA (m²)*a*c    96
EFFICIENCY UP TO MAX (%)*a    92,0%
ENERGY CLASS    A+
POWER TO THE HEART (kW)*a    4,8 - 12
RATED POWER (kW)*a    4,4 - 10,7
POWER TO THE WATER (kW)*a     -
RADIATION (kW)*a     -
HOURLY PELLET CONSUMPTION (kg/h)*a    0,8 - 2,4
WOOD HOURLY CONSUMPTION (kg/h)*a     -
PELLET HOPPER CAPACITY (kg)*a    19,0
WARM AIR DUCTING    -
MAXIMUM SINGLE DUCTING OUTLET (m)    -
PATENTED BURNER PELLETPOWER®    -
ROOM VENTILATION    SI
PRIMARY AIR FROM OUTSIDE    -
CO EMISSIONS (mg/m³; 13% of O2)*a    133
CO EMISSIONS (mg/m³; 10% of O2)*a    -
DUST EMISSIONS (mg/m³; 13% of O2)*a    15
DUST EMISSIONS (mg/m³; 10% of O2)*a    -
SILENCE (dB)    36
REMOTE CONTROL    SI
RADIO CONTROL WITH ROOM TEMPERATURE THERMOSTAT    -
WEEKLY PROGRAMMER (3 DAILY LIGHTING)    SI
«SMART INFO» FUNCTION    -
SYSTEM CIRCULATING PUMP    -
EXPANSION TANK    -
OVER PRESSURE VALVE    -
FLUE GASEXHAUST DIAMETER (mm)    80
MIN. FLUE DRAUGHT PRESSURE (Pa)    10
ELECTRIC CONSUMPTION (Watt)    70-270
HIGH TEMPERATURE SAFETY THERMOSTAT    SI
*A Emissions and performance data may change according to the fuel used. The values of pellet products have been obtained by using certified fuel according to EN 14961-2 A1-A2 norm. Wood logs products values may vary according to the type and quality of the wood logs used.
*B Provisional data under certification
*C IMPORTANT: when calculating the volume of the “Heated area” some relevant aspects must be considered: insulation of the building (Energy Class), position of the heater, climatic area and more aspects that can affect the values of performance. Reported data have been calculated on the base of roof not higher than 3 mts.
The manufacturer reserves the right to make changes without previous notice.
Downloadable docs
Energy Label - Product fiche
Energy Label - Label