Moon

Ventilated and natural convection wood stove

Heatable area
96 m².

1 - Fullscreen technology to maximise the view of the fire. (HxL 32x63 cm)

2 - Secondary and tertiary air, glass self-cleaning system

3 - Smoke exhaust Ø 130 mm

4 - Stainless steel and cast iron heat exchanger

5 - Ventilation kit with 2 thermostat axial motors

6 - Possibility of obtaining combustion air from outside Ø 60 mm

7 - Break-resistant combustion chamber made entirely from cast iron (WxHxP 65x33x36 cm)

8 - Extractable ash pan

9 - Primary air

10 - Reversible firebox door

11 - Flush design handle

Dimensions

Technical data

DIMENSIONS (HxWxD) 543x791x509

WEIGHT (kg) 187

HEATABLE AREA (m²)(SKYLINE 11 - 8 - 6) 96 - 71 - 51

EFFICIENCY UP TO MAX (%)(SKYLINE 11 - 8 - 6) 85,5% - 87,4% - 83,9%

ENERGY CLASS (SCALE A++/G) A+

POWER TO THE HEART (kW)(SKYLINE 11 - 8 - 6) 12,5 - 9,0 - 6,8

RATED POWER (kW)(SKYLINE 11 - 8 - 6) 10,6 - 7,9 - 5,7

POWER TO THE WATER (kW) -

RADIATION (kW) -

HOURLY PELLET CONSUMPTION (kg/h) -

WOOD HOURLY CONSUMPTION (kg/h)(SKYLINE 11 - 8 - 6) 2,89 - 2,07 - 1,56

PELLET HOPPER CAPACITY (kg) -

WARM AIR DUCTING OPT

MAXIMUM SINGLE DUCTING OUTLET (m) 2

PATENTED BURNER PELLETPOWER® -

ROOM VENTILATION OPT

PRIMARY AIR FROM OUTSIDE SI

CO EMISSIONS (mg/m³; 13% di O2)(SKYLINE 11 - 8 - 6) 160 - 228 - 348

CO EMISSIONS (mg/m³; 10% di O2) -

DUST EMISSIONS (mg/m³; 13% di O2)(SKYLINE 11 - 8 - 6) 9 - 17 - 18

DUST EMISSIONS (mg/m³; 10% di O2) -

SILENCE(dB) 36,00

WEEKLY PROGRAMMER (3 DAILY LIGHTING) -

SMART INFO FUNCTION -

SYSTEM CIRCULATING PUMP -

EXPANSION TANK -

OVER PRESSURE VALVE -

FLUE GASEXHAUST DIAMETER (mm) 130

MIN. FLUE DRAUGHT PRESSURE (Pa) -10

ELECTRIC CONSUMPTION (Watt) -

HIGH TEMPERATURE SAFETY THERMOSTAT -

*A Emissions and performance data may change according to the fuel used. The values of pellet products have been obtained by using certified fuel according to EN 14961-2 A1-A2 norm. Wood logs products values may vary according to the type and quality of the wood logs used.

*C IMPORTANT: when calculating the volume of the “Heated area” some relevant aspects must be considered: insulation of the building (Energy Class), position of the heater, climatic area and more aspects that can affect the values of performance. Reported data have been calculated on the base of roof not higher than 3 mts.

The manufacturer reserves the right to make changes without previous notice.

Downloadable docs