dorica stone

Pellet stove

Pellet stove with flowing and joined lines, it is surprising at first sight for its elegant architecture inspired by the classics. Equipped with the motorised fan technology PELLETPOWER® (Idra model) heat exchanger THERMOCORE® and simplified cleaning system EASY CLEANING. Available in versions, Silent, Air, Plus and Idra.

Heatable area
103 m².

1 - Programmable control screen, with remote control.
2 - Sliding access for pellet loading
3 - Precious soapstone
4 - Screen-printed ceramic glass and cast iron firebox door

OPTIONAL ACCESSORIES

Dimensions

Technical data

DIMENSIONS (HXWXD) 1123x560x644

WEIGHT (kg) 152

HEATABLE AREA (m²)*a*c 107

EFFICIENCY UP TO MAX (%)*a 93,0%

ENERGY CLASS A+

POWER TO THE HEART (kW)*a 3,8 - 13,2

RATED POWER (kW)*a 3,5 - 11,8

POWER TO THE WATER (kW)*a -

RADIATION (kW)*a -

HOURLY PELLET CONSUMPTION (kg/h)*a 0,8 - 2,7

WOOD HOURLY CONSUMPTION (kg/h)*a -

PELLET HOPPER CAPACITY (kg)*a 19,0

WARM AIR DUCTING -

MAXIMUM SINGLE DUCTING OUTLET (m) -

PATENTED BURNER PELLETPOWER® -

ROOM VENTILATION SI

PRIMARY AIR FROM OUTSIDE SI

CO EMISSIONS (mg/m³; 13% of O2)*a 57

CO EMISSIONS (mg/m³; 10% of O2)*a -

DUST EMISSIONS (mg/m³; 13% of O2)*a 8,5

DUST EMISSIONS (mg/m³; 10% of O2)*a -

SILENCE (dB) 36

REMOTE CONTROL SI

RADIO CONTROL WITH ROOM TEMPERATURE THERMOSTAT OPT

WEEKLY PROGRAMMER (3 DAILY LIGHTING) SI

«SMART INFO» FUNCTION SI

SYSTEM CIRCULATING PUMP -

EXPANSION TANK -

OVER PRESSURE VALVE SI

FLUE GASEXHAUST DIAMETER (mm) 80

MIN. FLUE DRAUGHT PRESSURE (Pa) 10

ELECTRIC CONSUMPTION (Watt) 70-270

HIGH TEMPERATURE SAFETY THERMOSTAT SI

*A Emissions and performance data may change according to the fuel used. The values of pellet products have been obtained by using certified fuel according to EN 14961-2 A1-A2 norm. Wood logs products values may vary according to the type and quality of the wood logs used.

*B Provisional data under certification

*C IMPORTANT: when calculating the volume of the “Heated area” some relevant aspects must be considered: insulation of the building (Energy Class), position of the heater, climatic area and more aspects that can affect the values of performance. Reported data have been calculated on the base of roof not higher than 3 mts.

The manufacturer reserves the right to make changes without previous notice.

Downloadable docs