Loading...

insert line idra

Pellet boiler-insert
 
Insert line 600 idra is an elegant and modern pellet powered fireplace. The innovative design of the vertical tube heat exchanger THERMOCORE® allows the appliance to achieve both a very high performance and maximum energy saving. The front door and the pellet burning pot, constructed in heavy cast iron, add an extra degree of reliability and longevity. Equipped with the PELLETPOWER® technology patented burner, with simplified cleaning system EASY CLEANING and with removable ash pan as standard. Easy and quick to install thanks to the support kit.
Heatable area
128 .
  • Black
 


1 - Removable door handle. Essential design and added safety
2 - PelletPower® patented burner
3 - Cast iron and glass inlayed firebox door

Every uniti s tested for one hour in the factory Our products don’t incur additional cost for adjustments or testing Simplified cleaning system Heat exchanger Thermocore® Low energy consumption Higher heat accumulation only 36 decibels of noise Smart info Pelletpower® - Patented burner External primary air input Madaly



Dimensions
  • insert line idra EVO
Technical data
DIMENSIONS (HXWXD)    641x715x655
WEIGHT (kg)    154
HEATABLE AREA (m²)*a*c    128
EFFICIENCY UP TO MAX (%)*a    91,4%
ENERGY CLASS    A+
POWER TO THE HEART (kW)*a    5,5 - 15,7
RATED POWER (kW)*a    5 - 14,2
POWER TO THE WATER (kW)*a    4,4 - 11,8
RADIATION (kW)*a    0,7 - 2,4
HOURLY PELLET CONSUMPTION (kg/h)*a    1,1 - 3,3
WOOD HOURLY CONSUMPTION (kg/h)*a     -
PELLET HOPPER CAPACITY (kg)*a    20,0
WARM AIR DUCTING    -
MAXIMUM SINGLE DUCTING OUTLET (m)    -
PATENTED BURNER PELLETPOWER®    SI
ROOM VENTILATION    -
PRIMARY AIR FROM OUTSIDE    SI
CO EMISSIONS (mg/m³; 13% of O2)*a    104,3
CO EMISSIONS (mg/m³; 10% of O2)*a    -
DUST EMISSIONS (mg/m³; 13% of O2)*a    14,9
DUST EMISSIONS (mg/m³; 10% of O2)*a    -
SILENCE (dB)    36
REMOTE CONTROL    -
RADIO CONTROL WITH ROOM TEMPERATURE THERMOSTAT    -
WEEKLY PROGRAMMER (3 DAILY LIGHTING)    SI
«SMART INFO» FUNCTION    SI
SYSTEM CIRCULATING PUMP    SI
EXPANSION TANK    SI
OVER PRESSURE VALVE    SI
FLUE GASEXHAUST DIAMETER (mm)    80
MIN. FLUE DRAUGHT PRESSURE (Pa)    10
ELECTRIC CONSUMPTION (Watt)    90-340
HIGH TEMPERATURE SAFETY THERMOSTAT    SI
*A Emissions and performance data may change according to the fuel used. The values of pellet products have been obtained by using certified fuel according to EN 14961-2 A1-A2 norm. Wood logs products values may vary according to the type and quality of the wood logs used.
*B Provisional data under certification
*C IMPORTANT: when calculating the volume of the “Heated area” some relevant aspects must be considered: insulation of the building (Energy Class), position of the heater, climatic area and more aspects that can affect the values of performance. Reported data have been calculated on the base of roof not higher than 3 mts.
The manufacturer reserves the right to make changes without previous notice.
Downloadable docs
INSERT LINE IDRA 15 - Report Ecodesign
Dop - Pinsidraevo
Product Fiche - Pinsidraevo
Energy Label - Pinsidraevo

Need help?

Contact us!