Loading...

1000 Easy

Pellet stove
 
Its anthracite grey colour and its meticulous finish make it the perfect unit for any room.
Heatable area
58 .
  • Grey
 


1- Programming control panel, with remote control
2- Cast iron burner
3- Cool touch door handle
4- Left side space-saving  flue outlet (optional)

Flue outlet options: rear - left side (optional)

Every uniti s tested for one hour in the factory Remote control Our products don’t incur additional cost for adjustments or testing Simplified cleaning system External rotor room fan is guaranteed for 4 years Low energy consumption Higher heat accumulation only 36 decibels of noise Thermosilent system Made in Italy





Dimensions
  • thermorossi_dimension_1000_easy
Technical data
DIMENSIONS (HXWXD)    865x429x504
WEIGHT (kg)    70
HEATABLE AREA (m²)*a*c    58
EFFICIENCY UP TO MAX (%)*a    86,3%
ENERGY CLASS    A+
POWER TO THE HEART (kW)*a    2,9 - 7,5
RATED POWER (kW)*a    2,5 - 6,4
POWER TO THE WATER (kW)*a     -
RADIATION (kW)*a     -
HOURLY PELLET CONSUMPTION (kg/h)*a    0,6 - 1,5
WOOD HOURLY CONSUMPTION (kg/h)*a     -
PELLET HOPPER CAPACITY (kg)*a    14,0
WARM AIR DUCTING    -
MAXIMUM SINGLE DUCTING OUTLET (m)    -
PATENTED BURNER PELLETPOWER®    -
ROOM VENTILATION    SI
PRIMARY AIR FROM OUTSIDE    OPT
CO EMISSIONS (mg/m³; 13% of O2)*a    94,1
CO EMISSIONS (mg/m³; 10% of O2)*a    -
DUST EMISSIONS (mg/m³; 13% of O2)*a    29,2
DUST EMISSIONS (mg/m³; 10% of O2)*a    -
SILENCE (dB)    36
REMOTE CONTROL    SI
RADIO CONTROL WITH ROOM TEMPERATURE THERMOSTAT    -
WEEKLY PROGRAMMER (3 DAILY LIGHTING)    SI
«SMART INFO» FUNCTION    -
SYSTEM CIRCULATING PUMP    -
EXPANSION TANK    -
OVER PRESSURE VALVE    SI
FLUE GASEXHAUST DIAMETER (mm)    80
MIN. FLUE DRAUGHT PRESSURE (Pa)    12
ELECTRIC CONSUMPTION (Watt)    66-271
HIGH TEMPERATURE SAFETY THERMOSTAT    SI
*A Emissions and performance data may change according to the fuel used. The values of pellet products have been obtained by using certified fuel according to EN 14961-2 A1-A2 norm. Wood logs products values may vary according to the type and quality of the wood logs used.
*B Provisional data under certification
*C IMPORTANT: when calculating the volume of the “Heated area” some relevant aspects must be considered: insulation of the building (Energy Class), position of the heater, climatic area and more aspects that can affect the values of performance. Reported data have been calculated on the base of roof not higher than 3 mts.
The manufacturer reserves the right to make changes without previous notice.
Downloadable docs
Energy Label - Label
Energy Label - Product fiche